General Pairing

• Press and hold BOTH buttons for 5+ seconds. One side will start blinking blue/white indicating ready to connect. 

• Enter your device settings and connect to “JLab JBuds Frames”. Solid white lights will indicate you are connected. 

Troubleshooting

NO AUDIO ON ONE SIDE OR BLUETOOTH DOES NOT CONNECT/RECONNECT (MANUAL RESET)

• Enter your Bluetooth device settings and forget the JLab JBuds Frames. 

• When JBuds Frames are powered OFF, Press and hold both buttons for 15+ sec. Frames will power ON then power OFF. 

• Press and hold both buttons for 3+ sec to power ON. JBuds Frames will start blinking blue/white indicating ready to connect. Enter device settings and reconnect.