General Pairing

• Press and hold both touch sensors for 3+ seconds to power ON. One earbud turns solid white and the other earbud blinks blue/white indicating ready to pair to your device

• Select “JLab JBuds Air” in your device settings. Voice prompt “Bluetooth connected” followed by solid white lights will indicate you are connected. 

Troubleshooting

Connection failure or earbuds disconnected from each other (Manual Reset) 

1. Keep the earbuds in the charging case and forget “JLab JBuds Air” from your Bluetooth device settings. 
2. Quick tap 7x on one earbud in the charging case. Earbud blinks blue 4 times 
3. Quick tap 7x on other earbud in the charging case. Earbud blinks blue 4 times. 
4. Take both earbuds out of the charging case. One earbud will be solid white and other will blink blue/white indicating ready to pair to your device.